0 30V power supply bench variable

Today I seeks variable power supply circuit come to deposit again. Which be the circuit that use base equipment, build not difficult follow the circuit can fine volt get 0-30V , give current get about 1-2A depend on transformer at you choose to use.

The prominent point of the circuit use transistor join a pin BE replace Zener Diode. Then get around problems about seek buy Zener voltage that can’t want. By transistor at use 2N3638 numbers or the number replaces. For transistor output use 2N3055 durable numbers current not exceed 2A. 

Read More

6 8A 0 28V Variable Power Supply Circuit

This is the schematic diagram of variable power supply. The output voltage of this power supply schema can be adjust from 0V to 28V DC, while the current output is static the rang is about 6A up to 8A.

Parts List:

R1 = 2K2 Ohm 2,5 Watt R2 = 240 Ohm R3,R4 = 0.1 Ohm 10 Watt R7 = 6K8 Ohm R8 = 10K Ohm R9 = 47 Ohm 0.5 Watt R10 = 8K2 Ohm C1, C7, C9 = 47nF C2 = 4700uF/50v – 6800uF/50v C3, C5 = 10uF/50v C4, C6 = 100nF C8 = 330uF/50v C10 = 1uF/16v C11 = 22nF

D1…D4 = four MR750 diodes (MR750 = 6 Ampere diode) or 2 x 4 1N5401 diodes. D5 = 1N4148, 1N4448, 1N4151 D6 = 1N4001 D10 = 1N5401 D11 = LED D7, D8, D9 = 1N4001 TR = 2 x 15 volt (30volt total) 6+- Ampere IC1 = LM317 T1, T2 = 2N3055 P1 = 5k P2 = 47 Ohm or 220 Ohm 1 Watt P3 = 10k trimmer pot F1 = 1 Amp F2 = 10 amp

Source: schemadiagram.net

Read More

Positive Variable Power Supply circuit

The following diagram is the schematic diagram of positive adjustable/variable power supply. It means that the power supply output will be DC current with positive [+] and ground [0] polarity.

Schematic diagram:

Power Supply Input:

Component part list:
R1 = 330
R2 = 1K
VR1 = 10K 10-turn trimpot
C1 = 2200uF/50V
C2,4 = 100nF ceramic
C3,4 = 10uF/63V
D1-6 = 1N5403
REG IC = LM317T
Heatsink

Visit this page to download the variable power supply diagram manual.

Read More